![]() dev/mem opened.Unhandled fault: Precise External Abort on non-linefetch (0x1018) at 0x40235728 dev/mem opened.Unhandled fault: Precise External Abort on non-linefetch (0x1018) at 0x400cd728 dev/mem opened.Unhandled fault: Precise External Abort on non-linefetch (0x1018) at 0x400ee728 dev/mem opened.Unhandled fault: Precise External Abort on non-linefetch (0x1018) at 0x40331004 I face the problem in step 6, the messages as devmem2 0x51001080 w 0x10110018 ( But i searched the slicon website can't get any information about PCIe generation, this information was got from another website:īrief description: * Item: PCI-E SATA Card * Controller Chip: SI元132 * Compliant with PCI-Express Revision 1.0a * 1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s full duplex channel ) Yes, The Silicon Image Sil3132 should be PCIe GEN1. using command to ioports cat /proc/ioports using command to verify pci device cat /proc/bus/pci/devices (result: can't get du /sys/bus/pci/Ġ ls /sys/bus/pci/devices/ (result :can't get using command to check iomem cat /proc/iomem I have cheked the reference clock is 100MHz and A11 pin of PCIe slot can be reset from low to hight and keep in hight after booting. Modify PCIe Endpoint in Sil3123 driver:įrom pcie_set_readrq(pdev, 4096) to pcie_set_readrq(pdev, 256)īTW, in step 1, no matter what i set is On or Off in SW5, the device still can't be detected. Kernel Config for PCIe to SATA device driver support. Message Signaled Interrupts (MSI and MSI-X)Ĥ. ![]() I have already reference the "DM816x C6A816x AM389x PCI Express Root Complex Driver User Guide" I have problems in pcie interface that can't detect PCIe to SATA device(Silicon Image Sil3132 ). Other Parts Discussed in Thread: TMS320DM8168 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |